Wallpaper Installation Services

Paste-the-Wall Wallpaper Installation Guide

Follow this easy step-by-step guide to install your Kaleon pre-cut wallpaper panels. If you have any questions during the process, our support team is here to help.

Before You Start

Prepare the Wall:
- Ensure your wall is smooth, clean, and dry.
- Remove any screws, nails, and fill in any cracks or holes.
- Sand down rough areas and clean the wall with warm, soapy water. Allow it to dry for at least 24 hours.
- Freshly painted walls should be allowed to dry for at least 4 weeks before installation.
Wallpaper Colour Considerations:
- Light wallpapers with white backgrounds or very light colours may reveal the wall’s texture. Darker wallpapers are better at covering up imperfections.
- Flat walls are best for wallpaper. You can prepare your wall using a process called mudding. Apply a skim coat of joint compound, allow it to dry, sand it smooth, and then apply a primer before installation.
Paint Considerations:
- Eggshell, satin, or semi-gloss paints work best for wallpaper. Avoid using latex paint, as it can tear when you remove the wallpaper.
- Never install wallpaper directly onto drywall. Drywall can soak up the paste, leaving none for the wallpaper. Always apply a primer first to seal the wall. This also prevents moisture absorption, reducing the risk of mould and fungus growth.
Let the Wallpaper Acclimatise:
- Unpack the wallpaper and let it sit in the room for at least 24 hours to adjust to the room temperature.
Inspect the Panels:
- Unroll the wallpaper and check all panels before installation to ensure they are correct and that the design matches.
Tools You’ll Need:
- Paste-the-wall adhesive
- Pasting brush or roller
- Squeegee with felt edge
- Sharp knife or scissors
- Tape measure, pencil
- Plumb line, spirit, or laser level
- Clean, damp microfibre cloth

Step-by-Step Installation

Prepare the Panels:
- Your Kaleon wallpaper panels are pre-cut to 600mm wide and made to the height you specified in your order. Each panel is numbered for easy installation from left to right.
Mark the First Panel:
- Measure 610mm from the left of the wall and use a plumb line or laser level to draw a vertical line. This will guide your first panel.
Apply the Paste:
- Spread adhesive directly onto the wall, extending slightly beyond the marked guideline. Ensure the paste is evenly applied to avoid air bubbles.
Install the First Panel:
- Align the first panel with your vertical guideline. Starting at the top, let the panel naturally drop into place. Smooth it from top to bottom using a squeegee or soft cloth to remove bubbles.
Install the Next Panels with Overlap:
- Each panel has a 20mm overlap to help the design match between panels.
- Install the next panel so that the design matches, ensuring you overlap the edges by 20mm.
- Smooth down the overlapping seam to ensure it adheres well and the pattern matches seamlessly.
Trim the Edges:
- Use a sharp knife to carefully trim away any excess wallpaper at the top and bottom of each panel. Always use a sharp blade to avoid tearing.
Repeat Until Finished:
- Continue installing the remaining panels from left to right, ensuring that each overlaps correctly and that the design remains aligned.

Post-Installation Tips:

Allow the wallpaper to dry at room temperature with good ventilation.
Avoid using heaters directly near the wallpaper for the first 24 hours to prevent shrinking.

That’s it! Enjoy your newly installed Kaleon Wallpaper. For any additional assistance, feel free to reach out to our customer support team.

Peel and Stick Wallpaper Installation Guide

This guide will help you install your Kaleon pre-cut peel and stick wallpaper panels with ease. Whether you’re using removable or permanent material, these steps ensure a successful installation. If you have any questions, don’t hesitate to contact our support team.

Before You Start

1. Prepare the Wall:
  - Ensure the wall is smooth, clean, dry, and well-painted.
  - Remove any screws, nails, and fill in any cracks or holes.
  - Sand down rough areas and clean the surface with a damp, soapy cloth. Allow it to dry for at least 24 hours.
2. Important Wall Preparation Tips:
  - Paint Preparation: To cover drywall compound, grease, lipstick, colours, texture, or any other contamination on the wall, we recommend applying at least one coat of primer and a second coat of acrylic-based or water-based paint. Wait at least two weeks before installing the wallpaper to prevent bleeding through the wallpaper. In uncertain cases, use two coats of “Viponds Self Adhesive Prep Coat”.
  - Avoid using washable or Teflon paints.
  - Mould: If there is any mould, remove it and repair the source of moisture to prevent future growth.
  - Guarantee: Failure to follow these recommendations may prevent us from guaranteeing proper installation conditions.

Our team can help determine the best type of wallpaper for your wall surface, whether it’s custom wallpaper, printed wallpaper, vinyl, mural, traditional wallpaper, or self-adhesive.

General Tips:
- Handle with care: Peel and stick wallpaper can stretch if pulled too hard, which can be useful for uneven walls, but avoid overstretching.
- Avoid sticky situations: Don’t let the adhesive side stick to itself. If it does, gently peel it apart.
- Let the wallpaper acclimatise: Lay the wallpaper panels flat for at least 24 hours in the room where they will be installed.
- Use a sharp blade: To avoid tearing, change your blade after every 2m (or 8ft) of cutting.
Tools You’ll Need:
- Squeegee with felt edge
- Sharp knife or craft blade
- Microfibre cloth
- Plumb line, spirit, or laser level
- Pencil
- Tape measure
- A second person (optional, but helpful!)

Step-by-Step Installation

Prepare the Panels:
Your Kaleon wallpaper panels are pre-cut and numbered for easy installation from left to right.
- Lay the panels out in order on the floor, making sure the designs align. Double-check that all panels are correct before you begin.
Mark the First Panel:
- Measure 610mm from the left of the wall and use a plumb line or laser level to mark a vertical guide. This will ensure your first panel is hung straight.
Position the First Panel:
- Peel back half a metre of the backing paper from the top of the first panel.
- Align the top right corner of the panel with your vertical guide.
Apply the First Panel:
- While one person holds the panel in place, the other person should begin smoothing it down using a squeegee. Start from the middle and work outwards in diagonal motions to remove air bubbles.
- If necessary, gently reposition the panel to ensure it is straight.
Install the Next Panels with Overlap:
- Each panel has a 20mm overlap to help the design match between panels.
- Peel back half a metre of the backing paper from the next panel, carefully matching the design and overlapping by 20mm.
- Smooth down the panel, pressing firmly at the seams to create a seamless join.
Trim the Edges:
- Use a sharp knife and a straight edge to trim away any excess wallpaper at the top and bottom of each panel. Always use a sharp blade to avoid tearing.

Tips for Removable & Permanent Peel and Stick:

Removable Wallpaper: This can be repositioned multiple times, making it easy to adjust. You can peel off panels and reapply without damaging the walls.
Permanent Wallpaper: The stronger adhesive in this option will become more secure over time. You can still reposition the panel, but aim for accurate placement the first time.

Finishing Up

Smooth and Secure:
- Once all the panels are installed, use a microfibre cloth to smooth down any remaining air pockets. Repeat this process after one week to ensure the wallpaper is fully bonded to the wall.
Let it Settle:
- Allow the wallpaper to dry at room temperature with proper ventilation. Avoid using heaters near the wallpaper for the first 24 hours.

That’s it! Enjoy your freshly installed Kaleon Peel and Stick wallpaper. If you have any issues or questions, feel free to contact our support team for assistance.

Check our list of installers

Contact them to obtain professional installation service